2.3 Fuellox Facia

Fuellox Facia is ideal for installations where the electronics are to be inside an enclosure of some type, and the user interface is external.

Installation Locations:

• On Electrical Cabinets
• Container Doors or Sides

Fuellox Facia Overview

Fuellox Facia Front

Fuellox Facia Inside

Main Elements

Part	Description
PCB	Fuellox PCB
Power Supply	Meanwell 240V to 12V DC Power Supply + Connectors and fuse
Relay	2 channel relay with 12V DC Coil
BLE	Bluetooth Aerial connector

Note the DIN rail may come with addional connectors. In some cases the relay may be used in conjunction with or replaced by a high current contactor.

2.3.1 Preparation

Place the template onto the surface where the Fuellox Facia will be mounted.

Check to make sure you have the correct template, and verify the hole sizes match the studs on your parts.

Template A3

PDF Template for Download - Print on A3

2.2.3 Mounting

Fix the Facia panel to the tank using a silicon type sealant.

Bolt down the 4 main studs using a suitable washer and a nylex nut.

Install the Fuellox Enclosure to the mount studs and scure that with washers and nylex nuts.

2.3.3 Wiring

Fuellox Facia comes in a 240V AC variant, or a 12V DC Variant.

Danger

240V AC systems must be installed by a licensed electrical contractor.

2.3.3.1 12V DC systems

Follow the 12V DC wiring guide here.

2.3.3.2 240V AC systems

Follow the mains and pump 240 V AC wiring guide here and the balance of the connections according to the main wiring detail

3.2.4 Aerial

Review the remote BLE Aerial Installation guidelines here.